Din and ISO Standards New Changes for Brass Fasteners Screws
Din and ISO Standards New Changes for Brass Fasteners Screws
Here is a comprehensive list fo fasteners standads which have changed from DIN to ISO. We can offer Brass Screws Brass fasteners Brass Nuts Brass Hex head Bolts Brass Nuts to new standards as well.
| Title DIN Standard | DIN | DIN EN ISO | DIN EN | DIN ISO | Comparable ISO Standard | Date of current standard/modified | Title of replacement standard | Comment |
|---|---|---|---|---|---|---|---|---|
| All-metal prevailing torque type hexagon nuts | (980) | 7042 | 27042 | 7042 | 1998-02 | Prevailing torque type (all-metal hexagon nuts), style 2 – Property classes 5, 8, 10 and 12 | Height of nut changed; width across flat according to ISO 272 included | |
| All-metal prevailing torque type hexagon nuts | (980) | 10513 | 30513 | 10513 | 1998-02 | Prevailing torque type all-metal hexagon nuts, style 2, with metric fine pitch thread – Property classes 8, 10 and 12 | Height of nut changed; width across flat according to ISO 272 included | |
| Clevis pins with head | (1434) | 22341 | 2341 | 1992-10 | Clevis pins with head | Only one head dimension. Partially other nominal lengths defined. | ||
| Clevis pins with head | (1435) | 22341 | 2341 | 1992-10 | Clevis pins with head | Only one head dimension. Partially other nominal lengths defined. | ||
| Countersunk (flat) head tapping screws with cross recess | (7982) | 7050 | ISO 7050 | 1990-08 | Cross recessed countersunk (flat) head tapping screws (common head style) | Head dimensions and countersunk angles changed | ||
| Cross recessed countersunk (flat) head screws (Countersunk heads according to ISO) | (965) | 7046-1 | (7046) | ISO 7046-1 | 1994-10 | Countersunk flat head screws (common head style) with type H or type Z cross recess – Property class 4.8 | Nominal size changed; head dimension changed; thread length changed; strength 8.8 included (see Part 2); penetration depth of cross slots changed | |
| Cross recessed countersunk (oval) head screws (Countersunk heads according to ISO) | (966) | 7047 | (7047) | ISO 7047 | 1994-10 | Countersunk raised head screws (common head style) with type H or type Z cross recess – Product grade A | Nominal size changed; head dimension changed; thread length changed; strength 8.8 omitted; penetration depth of cross slots changed | |
| Cross recessed countersunk head drilling screws with tapping screw thread | (7504) | 15482 | IS0 15482 | 2000-02 | Cross recessed countersunk head drilling screws with tapping screw thread | Standard divided into five single standards (EN ISO 10666, 15480, 15481, 15482, 15483); thread ST 3,9 omitted; hexagon head with collar and slot (Form L) omitted | ||
| Cross recessed pan head drilling screws with tapping screw thread | (7504) | 15481 | ISO 15481 | 2000-02 | Cross recessed pan head drilling screws with tapping screw thread | Standard divided into five single standards (EN ISO 10666, 15480, 15481, 15482, 15483); thread ST 3,9 omitted; hexagon head with collar and slot (Form L) omitted | ||
| Cross recessed pan head tapping screws | (7981) | 7049 | ISO 7049 | 1990-08 | Cross recessed pan head tapping screws | Marginal change of head dimensions. Caution with automatic feed and connection systems | ||
| Cross recessed raised countersunk head drilling screws with tapping screw thread | (7504) | 15483 | ISO 15483 | 2000-02 | Cross recessed raised countersunk head drilling screws with tapping screw thread | Standard divided into five single standards (EN ISO 10666, 15480, 15481, 15482, 15483); thread ST 3,9 omitted; hexagon head with collar and slot (Form L) omitted | ||
| Drilling screws with tapping screw thread – Mechanical and functional properties | (7504) | 10666 | ISO 10666 | 2000-02 | Drilling screws with tapping screw thread – Mechanical and functional properties | Standard divided into five single standards (EN ISO 10666, 15480, 15481, 15482, 15483); thread ST 3,9 omitted; hexagon head with collar and slot (Form L) omitted | ||
| Grooved pins – Full-length parallel grooved, with chamfer | (1473) | 8740 | (28740) | ISO 8740 | 1998-03 | Grooved pins – Full-length parallel grooved, with chamfer | Nominal lengths redefined. Shear rate increased. | |
| Grooved pins – Fulllength parallel grooved, with pilot | (1470) | 8739 | (28739) | ISO 8739 | 1998-03 | Grooved pins – Full-length parallel grooved, with pilot | Nominal lengths redefined. Shear rate increased. | |
| Grooved pins – Fulllength taper grooved | (1471) | 8744 | (28744) | ISO 8744 | 1998-03 | Grooved pins – Full-length taper grooved | Nominal lengths redefined. Shear rate increased. | |
| Grooved pins – Half-length reverse-taper grooved | (1474) | 8741 | (28741) | ISO 8741 | 1998-03 | Grooved pins – Half-length reverse-taper grooved | Nominal lengths redefined. Shear rate increased. | |
| Grooved pins – Half-length taper grooved | (1472) | 8745 | (28745) | ISO 8745 | 1998-03 | Grooved pins – Half-length taper grooved | Nominal lengths redefined. Shear rate increased. | |
| Grooved pins with round head | (1476) | 8746 | (28746) | ISO 8746 | 1998-03 | Grooved pins with round head | Chamfer redefined | |
| Hexagon Bolts without Hexagon Nut – with Hexagon Nut, Type g | (601) | 4016 | (24016) | 4016 | ISO 4016 | 2001-03 | Hexagon head bolts – Product grade C | Nominal size extended; width across flats according to DIN ISO 272 included |
| Hexagon bolts, Metric fine thread, Types m and mg | (960) | 8765 | (28765) | 8765 | ISO 8765 | 2001-03 | Hexagon thin nuts (chamfered) with metric fine pitch thread – Product grades A and B | Nominal size extended; width across flats according to DIN ISO 272 included |
| Hexagon flange bolts | (6921) | 1665 | ISO 8102 | 1998-11 | Hexagon bolts with flange, heavy series | Dimensions partially changed; width across flats according to ISO 272; strength 12.9 omitted | ||
| Hexagon head bolts with shank; M 1,6 to M 39 screw threads, Product grades A and B | (931-1) | 4014 | (24014) | 4014 | ISO 4014 | 2001-03 | Hexagon head bolts – Product grades A and B | Nominal size extended; width across flats according to DIN ISO 272 included |
| Hexagon head screws – Product grades A and B | (933) | 4017 | (24017) | 4017 | ISO 4017 | 2001-03 | Hexagon head screws – Product grades A and B | Nominal size extended; width across flats according to DIN ISO 272 included |
| Hexagon nuts with flange | (6923) | 1661 | 4161 | 1998-02 | Hexagon nuts with flange | Fine thread omitted to be included in a separate standard later); width across flat M 10 changed | ||
| Hexagon nuts; Metric Thread, Type g | (555) | 4034 | (24034) | 4034 | ISO 4034 | 2001-03 | Hexagon nuts – Product grade C | Width across flats according to DIN ISO 272 included; nominal diameter reduced |
| Hexagon nuts; Metric screw threads; Product grades A and B | (934) | 4032 | (24032) | 4032 | ISO 4032 | 2001-03 | Hexagon nuts, style 1 – Product grades A and B | Nominal diameter changed, height of the nut changed partially; nuts with fine thread specified in DIN EN ISO 8673; width across flats according to DIN ISO 272 included |
| Hexagon nuts; Metric screw threads; Product grades A and B | (934) | 8673 | (28673) | ISO 8673 | 2001-03 | Hexagon nuts, style 1, with metric fine pitch thread – Product grades A and B | Nominal diameter changed, height of the nut changed partially; nuts with regular type screw thread specified in DIN EN ISO 4032; width across flats according to DIN ISO 272 included | |
| Hexagon screws, Thread Approximately to Head, Metric Thread, Type g | (558) | 4018 | (24018) | 4018 | ISO 4018 | 2001-03 | Hexagon head screws – Product grade C | Nominal size extended; width across flats according to DIN ISO 272 included |
| Hexagon socket countersunk head screws | (7991) | 10642 | ISO 10462 | 2004-06 (z1998- | Hexagon socket countersunk head screws | |||
| Hexagon socket head cap screws | (912) | 4762 | ISO 4762 | 2004-06 | Hexagon socket head cap screws | Nominal size range changed; fine thread deleted (siehe ISO 21269) | ||
| Hexagon socket set screws with cone point | (914) | 4027 | ISO4027 | 2004-05 | Hexagon socket set screws with cone point | Nominal sizes M 1,4, M 1,8, M 14, M 18 and M 22 omitted | ||
| Hexagon socket set screws with cup point | (916) | 4029 | ISO 4029 | 2004-05 | Hexagon socket set screws with cup point | |||
| Hexagon socket set screws with dog point | (915) | 4028 | ISO 4028 | 2004-05 | Hexagon socket set screws with dog point | Nominal sizes M 1,4, M 1,8, M 14, M 18 and M 22 omitted | ||
| Hexagon socket set screws with flat point | (913) | 4026 | 4026 | 2004-05 | Hexagon socket set screws with flat point | Nominal sizes M 1,4, M 1,8, M 14, M 18 and M 22 omitted | ||
| Hexagon thin nuts with M 1,6 to M 10 threads | (439-1) | 4036 | (24036) | 4036 | ISO 4036 | 2001-02 | Hexagon thin nuts (unchamfered) – Product grade B | Correlation of dimensions with DIN 439-1, except for the width across flat of the nut M 10 |
| Hexagon thin nuts with M 1,6 to M 52 and M 8×1 to M 52×3 threads | (439-2) | 4035 | (24035) | ISO 4035 | 2001-03 | Hexagon thin nuts (unchamfered) – Product grades A and B | In tables 1 and 2 abbreviations changed and some specifications (thread dimensions) changed | |
| Hexagon thin nuts with M 1,6 to M 52 and M 8×1 to M 52×3 threads | (439-2) | 4035 | (24035) | 4035 | (4035 ) | 2001-03 | Hexagon thin nuts (unchamfered) – Product grades A and B | Standard divided by regular type screw threads and fine threads; width across flats according to ISO 272 changed; nominal size range changed; fine thread see ISO 8675 |
| Hexagon thin nuts with M 1,6 to M 52 and M 8×1 to M 52×3 threads | (439-2) | 8675 | (28675) | ISO 8675 | 2001-03 | Hexagon thin nuts (unchamfered) with metric fine pitch thread – Product grades A and B | Standard divided by regular type screw threads and fine threads; width across flats according to ISO 272 changed; nominal size range changed; regular type screw thread see ISO 4035 | |
| Hexagon washers head drilling screws with tapping screw thread | (7504) | 15480 | ISO 15480 | 2000-02 | Hexagon washers head drilling screws with tapping screw thread | Standard divided into five single standards (EN ISO 10666, 15480, 15481, 15482, 15483); thread ST 3,9 omitted; hexagon head with collar and slot (Form L) omitted | ||
| High-strength hexagon head bolts with large widths across flats for structural steel bolting | (6914) | 14399-4 | ISO 7412 | 2006-06 | High-strength structural bolting assemblies for preloading – Part 4: System HV – Hexagon bolt and nut assemblies | |||
| High-strength hexagon nuts with large widths across flats for structural steel bolting | (6915) | 14399-4 | 2006-06 | High-strength structural bolting assemblies for preloading – Part 4: System HV – Hexagon bolt and nut assemblies | ||||
| M 8×1 to M 100×4 hexagon head bolts with fine pitch thread | (961) | 8676 | (28676) | 8676 | ISO 8676 | 2001-03 | Hexagon head screws with metric fine pitch thread – Product grades A and B | Nominal size extended; width across flats according to DIN ISO 272 included |
| Mushroom head square neck bolts | 603 | ISO 8677 | 1981-10 | |||||
| Plain washers – Extra large series, product grade C | (440) | 7094 | ISO 7094 | 2000-12 | Plain washers – Extra large series, product grade C | Nominal sizes changed, nominal size 24 size “a” redefined to the maximum, square-end hole Form R omitted; (standard DIN 440 still valid) | ||
| Plain washers for clevis pins; product grade A | (1440) | 28738 | ISO 8738 | 1992-10 | Plain washers for clevis pins; product grade A | Nominal sizes changed | ||
| Prevailing torque type – All-metal hexagon nuts with flange | (6927) | 1664 | ISO 7044 | 1998-02 | Prevailing torque type – All-metal hexagon nuts with flange | Width across flat M 10 changed | ||
| Prevailing torque type all-metal hexagon nuts | (6925) | 7042 | (27042) | ISO 7042 | 1998-02 | Prevailing torque type (all-metal hexagon nuts), style 2 – Property classes 5, 8, 10 and 12 | Height of nut changed; width across flat according to ISO 272 included | |
| Prevailing torque type all-metal hexagon nuts | (6925) | 10513 | (30513) | ISO 10513 | 1998-02 | Prevailing torque type all-metal hexagon nuts, style 2, with metric fine pitch thread – Property classes 8, 10 and 12 | Height of nut changed; width across flat according to ISO 272 included | |
| Prevailing torque type hexagon nuts with flange (with non-metallic insert), with metric fine pitch thread | (6926) | 1666 | ISO 12125 | 1998-02 | Prevailing torque type hexagon nuts with flange (with non-metallic insert), with metric fine pitch thread | Width across flat M 10 changed | ||
| Prevailing torque type hexagon nuts with non-metallic insert | (982) | 7040 | 27040 | ISO 7040 | 1998-02 | Prevailing torque type hexagon nuts (with non-metallic insert), style 1 – Property classes 5, 8 and 10 | Height of nut changed; width across flat according to ISO 272 included | |
| Prevailing torque type hexagon nuts with non-metallic insert | (982) | 10512 | 30512 | ISO 10512 | 1998-02 | Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread – Property classes 6, 8 and 10 | Height of nut changed; width across flat according to ISO 272 included | |
| Prevailing torque type hexagon nuts with non-metallic insert | (6924) | 7040 | (27040) | ISO 7040 | 1998-02 | Prevailing torque type hexagon nuts (with non-metallic insert), style 1 – Property classes 5, 8 and 10 | Height of nut changed; width across flat according to ISO 272 included | |
| Prevailing torque type hexagon nuts with non-metallic insert | (6924) | 10512 | (30512) | ISO 10512 | 1998-02 | Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread – Property classes 6, 8 and 10 | Height of nut changed; width across flat according to ISO 272 included | |
| Prevailing torque type hexagon thin nuts with non-metallic insert | (985) | 10511 | ISO 10511 | 1998-02 | Prevailing torque type hexagon, thin nuts (with non-metallic insert) | Height of nut changed; width across flat according to ISO 272 included | ||
| Product grade A washers with a hardness from 300 HV, designed for use with hexagon head bolts and nuts | (125-2) | 7089 | ISO 7089 | 2000-11 | Plain washers – Normal series, Product grade A | Without chamfer, up to nominal diameter 64 | ||
| Product grade A washers with a hardness from 300 HV, designed for use with hexagon head bolts and nuts | (125-2) | 7090 | 7090 | 1990-03 | Plain washers, chamfered – Normal series, Product grade A | Without chamfer, up to nominal diameter 64 | ||
| Product grade A washers with a hardness up to 250 HV, designed for use with cheese head screws | (433-1) | 7092 | ISO 7092 | 2000-11 | Plain washers – Small series, Product grade A | Pyramid diamond hardness 140 HV cancelled; rating changed | ||
| Product grade A washers with a hardness up to 250 HV, designed for use with hexagon head bolts and nuts | (125-1) | 7089 | ISO 7089 | 2000-11 | Plain washers – Normal series, Product grade A | Without chamfer, up to nominal diameter 64 | ||
| Product grade A washers with a hardness up to 250 HV, designed for use with hexagon head bolts and nuts | (125-1) | 7090 | ISO 7090 | 1990-03 | Plain washers, chamfered – Normal series, Product grade A | Without chamfer, up to nominal diameter 64 | ||
| Product grade A washers with a hardness up to 300 HV, designed for use with cheese head screws | (433-2) | 7092 | ISO 7092 | 2000-11 | Plain washers – Small series, Product grade A | Nominal sizes changed | ||
| Product grade C washers, designed for use with hexagon head bolts and nuts | (126) | 7091 | ISO 7091 | 2000-11 | Plain washers – Normal series, Product grade C | Nominal sizes changed | ||
| Raised countersunk (oval) head; tapping screws with cross recess | (7983) | 7051 | ISO 7051 | 1990-08 | Cross recessed raised countersunk (oval) head tapping screws | Head dimensions and countersunk angles changed | ||
| Recessed raised cheese (fillister) head screws | (7985) | 7045 | ISO 7045 | 1994-10 | Pan head screws with type H or type Z cross recess – product grade A | Nominal size changed; head dimension changed; thread length changed; penetration depth of cross slots changed | ||
| Slotted cheese head screws – Product grade A | (84) | 1207 | ISO 1207 | 1994-10 | Slotted cheese head screws – Product grade A | Modifications of dimensions < 2,5; dimension of slots changed; partly nominal lengths deleted; strength 8.8 deleted | ||
| Slotted countersunk (flat) head screws (Countersunk heads according to ISO) | (963) | 2009 | (2009) | ISO 2009 | 1994-10 | Slotted countersunk flat head screws (common head style) – Product grade A | Nominal size changed; head dimension changed; thread length changed; strength 8.8 cancelled | |
| Slotted headless screws with shank | (427) | 2342 | ISO 2342 | 2004-05 | Slotted headless screws with shank | |||
| Slotted pan head screws – Product grade A | (85) | 1580 | ISO 1580 | 1994-10 | Slotted pan head screws – Product grade A | Thread included; dimensions of head and slot changed; strength 8.8 deleted | ||
| Slotted raised countersunk (oval) head screws (Countersunk heads according to ISO) | (964) | 2010 | (2010) | ISO 2010 | 1994-10 | Slotted raised countersunk head screws (common head style) – Product grade A | Nominal size changed; head dimension changed; thread length changed; strength 8.8 cancelled | |
| Slotted set screws with cone point | (553) | 27434 | ISO 7434 | 1992-10 | Slotted set screws with cone point | No modifications of dimensions | ||
| Slotted set screws with cup point | (7976) | 1479 | ISO 1479 | 1990-08 | Hexagon head tapping screws | No modifications of dimensions | ||
| Slotted set screws with flat point | (551) | 24766 | ISO 4766 | 1992-10 | Slotted set screws with flat point | No modifications of dimensions | ||
| Slotted set screws with long dog point | (94) | 1234 | ISO 1234 | 1998-02 | Split pins | No modifications of dimensions | ||
| Slotted set screws with long dog point | (417) | 27435 | ISO 7435 | 1992-10 | Slotted set screws with long dog point | No modifications of dimensions | ||
| Thread rolling screws for ISO metric thread – Part 1: Technical specifications for case hardened and tempered screws | 7500-1 | (7085) | 2009-06 | Thread rolling screws for ISO-metric thread | Normative revision, values for case-hardening depth and hole size revised, torque values reduced | |||
| Washers for hightensile bolting in steel structures | (6916) | 14399-6 | ISO 7416 | 2006-06 | High-strength structural bolting assemblies for preloading – Part 6: Plain chamfered washers | |||
| Washers; outside diameter Ëœ 3 x bolt diameter | (9021) | 7093-1 | ISO 7093-1 | 2000-11 | Plain washers – Large series – Part 1: Product grade A | Dimensions partially changed | ||
| Washers; outside diameter Ëœ 3 x bolt diameter | (9021) | 7093-2 | ISO 7093-2 | 2000-11 | Plain washers – Large series – Part 2: Product grade C | Dimensions partially changed |